home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
mods
/
cellular
/
nec06.txt
< prev
next >
Wrap
Text File
|
1993-04-11
|
2KB
|
54 lines
NEC M4700 (TR5E800-11H)
NOTES: This is a single NAM unit, quad NAM units are covered in file NEC07.
The ESN prefix is 135 decimal, 87 hex.
NEC: 1-800-421-2141
1. This phone officially requires an NEC programing adaptor part
number 41-2012, if you have one attach it between the data cable and the
transceiver and power up the phone.
If you do not have a programing adaptor one can be made from a 15 pin
D plug and a 15 pin D socket. Wire it straight through and jumper pins
2 and 11. Connect this between the tranceiver and data cable and power
up the phone.
2. Having powered up the phone using one of the above methods press
RCL # 0 1 to enter test mode.
5. Press RCL # 7 1 to enter programing mode.
6. The # key stores and increments each step.
7. Press CLR briefly to correct an entry.
8. At any time press and hold CLR to exit programing mode then press RCL
# 0 2 to exit test mode.
PROGRAMING DATA
STEP# #OF DIGITS/RANGE DESCRIPTION
01 10 DIGITS MIN (AREA CODE & TEL#)
02 4 DIGITS LOCK CODE
03 00000 - 32767 SYSTEM ID
04 2 DIGITS GROUP ID (10 IN USA)
05 0333 OR 0334 INITIAL PAGING CHANNEL
06 0 OR 1 PREFERRED SYSTEM
07 2 DIGITS ACCESS OVERLOAD CLASS
08 0 OR 1 MIN MARK
09 0 OR 1 LOCAL USE MARK
10 0 OR 1 RADIO MUTE
11 0 OR 1 HORN ALERT (ONLY AVAILABLE IF STEP 10 IS
SET TO 0)
NOTE: To toggle between NAM 1 and 2 press FCN STO 3 with phone out of
programing mode.
LOCK: F * four digits = Partial lock, F # four digits = Full lock. Use same
sequence to unlock.
SYSTEM SELECT: F 5 then 5 to scroll.